Date of Publication :14th March 2017
Abstract: The main sources of the pollution that causes the environmental degradation are urbanization and industrialization. There is rapid growth in the development of manufacturing industries associated with the Foundry plants. Especially, Steels and Iron manufacturing industries tends to produce a lot of pollutants in the environment. Advancements in several polluting materials have been made in manufacturing over the past decades and that the environmental impact has gradually shifted to so-called dispersed sources of pollution. Nonetheless, production processes in the industries always make up a significant share of India's total emissions, and further that their exposure to' non-sustainability' is very necessary. In these methods, production and extraction of metals from ores by different metallurgical processes and processes for melting, moulding and casting, etc. are followed by noise, heat, fly-ash, dust particles, nitrogen oxides, metals and sulphur evolution. There exists a need for development of a coke-less cupola furnace that avoids the harmful emission of gases which pollutes the environment and causes health issues for human beings.
Reference :
-
- Y. Guney, Y. D. Sari, M. Yalcin, A. Tuncan, and S. Donmez, “Re-usage of waste foundry sand in high-strength concrete,” Waste Manag., 2010.
- A. Bührig-Polaczek and H. Träger, “Foundry Technology,” in Ullmann’s Encyclopedia of Industrial Chemistry, 2012.
- J. Madias, “Electric arc furnace,” in Ironmaking and Steelmaking Processes: Greenhouse Emissions, Control, and Reduction, 2016
- S. Ramrattan, K. Nagarajan, R. Bharadwaj, H. Makin, and M. Hirata, “A Study of Erosion in Aeration Green Sand Molds with Various Alloys,” Trans. Am. Foundry Soc., 2011
- H. Ha, P. A. Rogerson, J. R. Olson, D. Han, L. Bian, and W. Shao, “Analysis of pollution hazard intensity: A spatial epidemiology case study of soil Pb contamination,” Int. J. Environ. Res. Public Health, 2016.
- A. Torres, L. Bartlett, and C. Pilgrim, “Effect of foundry waste on the mechanical properties of Portland Cement Concrete,” Constr. Build. Mater., 2017.
- C. Cardoso et al., “Using foundry slag of ferrous metals as fine aggregate for concrete,” Resour. Conserv. Recycl., 2018.
- P. Gengel, A. Pribulová, and P. Futáš, “Possibilities of foundry dust utilization in foundry process,” Acta Metall. Slovaca, 2010.
- D. Snelling, C. B. Williams, and A. P. Druschitz, “A Comparison of Binder Burnout and Mechanical Characteristics of Printed and Chemically Bonded Sand Molds,” Solid Free. Fabr. Symp., 2014.
- M. A. A. Khan, A. K. Sheikh, and B. S. AlShaer, “Evolution of metal casting technologies—a historical perspective,” in SpringerBriefs in Applied Sciences and Technology, 2017.
- B. A. Danzomo, M. E. Salami, S. Jibrin, and I. M. Nor, “Performance Evaluation of wet scrubber system for industrial air pollution control,” ARPN J. Eng. Appl. Sci., 2012.
- T. Enzenbach and R. Gurtner, “Increase the energy efficiency of the cupola melting process in the iron foundry,” Gefahrstoffe Reinhaltung der Luft, 2017.
- D. Baricová, A. Pribulová, and P. Demeter, “Comparison of possibilities the blast furnace and cupola slag utilization by concrete production,” Arch. foundry Eng., 2010.
- E. Bidoli et al., “Residence in proximity of an Iron foundry and risk of lung cancer in the municipality of Trieste, Italy, 1995– 2009,” Int. J. Environ. Res. Public Health, 2015.
- A. W. OrÅ‚owicz, M. Mróz, M. Tupaj, and A. Trytek, “Materials used in the automotive industry,” Arch. Foundry Eng., 2015
- P Durga, S Jeevitha, A Poomalai, M Sowmiya, S Balamurugan, “Aspect Oriented Strategy to model the Examination Management Systems”, International Journal of Innovative Research in Science, Engineering and Technology , Vol. 4, Issue 2, February 2015
- RS Venkatesh, PK Reejeesh, S Balamurugan, S Charanyaa, “Further More Investigations on Evolution of Approaches and Methodologies for Securing Computational Grids”, International Journal of Innovative Research in Science, Engineering and Technology , Vol. 4, Issue 1, January 2015
- V M Prabhakaran, S Balamurugan, S Charanyaa, “Developing Use Cases and State Transition Models for Effective Protection of Electronic Health Records (EHRs) in Cloud”, International Journal of Innovative Research in Computer and Communication Engineering, 2015
- Khaleel Ahmad, Monika Sahu, Madhup Shrivastava, Murtaza Abbas Rizvi and Vishal Jain, “An Efficient Image Retrieval Tool: Query Based Image Management System”, International Journal of Information Technology (BJIT), available online at 26th May, 2018, having ISSN No. 2511-2104.
- Manjot Kaur, Tanya Garg, Ritika Wason and Vishal Jain, “Novel Framework for handwritten Digit Recognition Through Neural Networks”, 3C Technology, Glosses of innovation applied to the SME, ISSN: 2254-4143, Vol. 29, Issue 2, page no. 448 – 467.