Author : Dheeraj Tripathi 1
Date of Publication :13th June 2017
Abstract: The paper looks at the solution of a problem concerning the number of movements linked to weighing frequencies, which consists of developing the device for measuring the freight mass directly attached to the dump truck. According to the concept of using hydraulic sensors the recommended system is worked. This consists of a hydraulic sensing system with higher pressure oil pipelines of both the left and right pipe-line, hydraulic ram hydro pressure pipelines, a weight thorned petroleum pressure gage, a three-run distributive tap, an hydraulic ram for an oil tap, an oil pump, a low pressure gas pipeline, a rear pipeline and an intermediate stream. Oil pump is available with a working valve. The hydraulic sensors of left and right longerons are linked in parallel via a three-running dispensing tap and a bilateral action valve to a hydraulic high-pressure oil pipeline. The hydraulic sensors for the weighing of freight equipment operate in a similar way to hydraulic ram. The dependence which enables to determine the main device parameters for the left and right sensors based on the passed quantity of working flubid, Reynold number and pressure decreases in all elements of the hydraulic system, such as the internal diameter of the oil pipeline for liquid supply. The dependence is provided. The proposed device can be used in specific practical application in combination with the system for fixing the freight weight transported.
Reference :
-
- N. Podoprigora, V. Dobromirov, A. Pushkarev, and V. Lozhkin, “Methods of Assessing the Influence of Operational Factors on Brake System Efficiency in Investigating Traffic Accidents,” in Transportation Research Procedia, 2017.
- M. S. Dmitriyev, M. L. Khasanova, and A. V. Raznoshinskaya, “Substantiation of Hydraulic System for Weighing Freights Transported with Dump Trucks,” in Procedia Engineering, 2017.
- C. Li, Y. Mao, J. Zhou, N. Zhang, and X. An, “Design of a fuzzy-PID controller for a nonlinear hydraulic turbine governing system by using a novel gravitational search algorithm based on Cauchy mutation and mass weighting,” Appl. Soft Comput. J., 2017.
- I. Mughal, K. Z. Jadoon, P. Martin Mai, S. AlMashharawi, and T. M. Missimer, “Experimental measurement of diffusive extinction depth and soil moisture gradients in a dune sand aquifer in western Saudi Arabia: Assessment of evaporation loss for design of an MAR system,” Water (Switzerland), 2015.
- N. D. Woodman, W. G. Burgess, K. M. Ahmed, and A. Zahid, “A partially coupled hydro-mechanical analysis of the Bengal Aquifer System under hydrological loading,” Hydrol. Earth Syst. Sci.
- M. Inthachot, S. Saehaeng, J. F. J. Max, J. Müller, and W. Spreer, “Hydraulic Ram Pumps for Irrigation in Northern Thailand,” Agric. Agric. Sci. Procedia, 2015.
- M. Moshelion, O. Halperin, R. Wallach, R. Oren, and D. A. Way, “Role of aquaporins in determining transpiration and photosynthesis in water-stressed plants: Crop water-use efficiency, growth and yield,” Plant, Cell and Environment. 2015.
- P. P. Sengupta and J. Narula, “RV form and function: A piston pump, vortex impeller, or hydraulic ram?,” JACC: Cardiovascular Imaging. 2013
- A. Pathak, A. Deo, S. Khune, S. Mehroliya, and M. Pawar, “Design of Hydraulic Ram Pump,” Int. J. Innov. Res. Sci. Technol., 2016.
- R. D. Balgude, S. P. Rupanavar, P. S. Bagul, and A. R. Ramteke, “Designing of Hydraulic Ram Pump,” Int. J. Eng. Comput. Sci., 2015.
- S. Sheikh, C. C. Handa, and A. P. Ninawe, “Design Methodology for Hydraulic Ram Pump (Hydram),” Int. J. Mech. Eng. Rob. Res., 2013.
- Y. Li, B. Li, J. Ruan, and X. Rong, “Research of mammal bionic quadruped robots: A review,” in IEEE Conference on Robotics, Automation and Mechatronics, RAM - Proceedings, 2011.
- Bishwajeet Pandey, Vishal Jain, Rashmi Sharma, Mragang Yadav, D M Akbar Hussain, “Scaling of Supply Voltage in Design of Energy Saver FIR Filter on 28nm FPGA”, International Journal of Control and Automation (IJCA), having ISSN No. 2005- 4297, Vol. 10, No. 12, December, 2017, page no. 77 to 88.'
- Balamurugan Shanmugam, Visalakshi Palaniswami, “Modified Partitioning Algorithm for Privacy Preservation in Microdata Publishing with Full Functional Dependencies”, Australian Journal of Basic and Applied Sciences, 7(8): pp.316-323, July 2013
- Jaganraj L, Balamurugan S. Empirical Investigation on Certain Anonymization Strategies for Preserving Privacy of Social Network Data, International Journal of Emerging Technology and Advanced Engineering. 2013 Oct; 3(10):55–63
-
- N. Podoprigora, V. Dobromirov, A. Pushkarev, and V. Lozhkin, “Methods of Assessing the Influence of Operational Factors on Brake System Efficiency in Investigating Traffic Accidents,” in Transportation Research Procedia, 2017.
- M. S. Dmitriyev, M. L. Khasanova, and A. V. Raznoshinskaya, “Substantiation of Hydraulic System for Weighing Freights Transported with Dump Trucks,” in Procedia Engineering, 2017.
- C. Li, Y. Mao, J. Zhou, N. Zhang, and X. An, “Design of a fuzzy-PID controller for a nonlinear hydraulic turbine governing system by using a novel gravitational search algorithm based on Cauchy mutation and mass weighting,” Appl. Soft Comput. J., 2017.
- I. Mughal, K. Z. Jadoon, P. Martin Mai, S. Al-Mashharawi, and T. M. Missimer, “Experimental measurement of diffusive extinction depth and soil moisture gradients in a dune sand aquifer in western Saudi Arabia: Assessment of evaporation loss for design of an MAR system,” Water (Switzerland), 2015.
- N. D. Woodman, W. G. Burgess, K. M. Ahmed, and A. Zahid, “A partially coupled hydro-mechanical analysis of the Bengal Aquifer System under hydrological loading,” Hydrol. Earth Syst. Sci., 2019.
- M. Inthachot, S. Saehaeng, J. F. J. Max, J. Müller, and W. Spreer, “Hydraulic Ram Pumps for Irrigation in Northern Thailand,” Agric. Agric. Sci. Procedia, 2015.
- M. Moshelion, O. Halperin, R. Wallach, R. Oren, and D. A. Way, “Role of aquaporins in determining transpiration and photosynthesis in water-stressed plants: Crop water-use efficiency, growth and yield,” Plant, Cell and Environment. 2015.
- P. P. Sengupta and J. Narula, “RV form and function: A piston pump, vortex impeller, or hydraulic ram?,” JACC: Cardiovascular Imaging. 2013.
- A. Pathak, A. Deo, S. Khune, S. Mehroliya, and M. Pawar, “Design of Hydraulic Ram Pump,” Int. J. Innov. Res. Sci. Technol., 2016.
- R. D. Balgude, S. P. Rupanavar, P. S. Bagul, and A. R. Ramteke, “Designing of Hydraulic Ram Pump,” Int. J. Eng. Comput. Sci., 2015.
- S. Sheikh, C. C. Handa, and A. P. Ninawe, “Design Methodology for Hydraulic Ram Pump (Hydram),” Int. J. Mech. Eng. Rob. Res., 2013.
- Y. Li, B. Li, J. Ruan, and X. Rong, “Research of mammal bionic quadruped robots: A review,” in IEEE Conference on Robotics, Automation and Mechatronics, RAM - Proceedings, 2011.
- Anupam Baliyan, Vishal jain, Manish Kumar, Achin Jain and Uttam Singh, “Performance Analysis of Amdahl’s and Gustafson’s Law under multicore Processor Architecture”, INDIACom-2018, 5th 2018 International Conference on “Computing for Sustainable Global Development”, 14th – 16th March, 2018, held at Bharati Vidyapeeth’s Institute of Computer Applications and Management (BVICAM), New Delhi (INDIA)
- Bishwajeet Pandey, Vishal Jain, Rashmi Sharma, Mragang Yadav, D M Akbar Hussain, “Scaling of Supply Voltage in Design of Energy Saver FIR Filter on 28nm FPGA”, International Journal of Control and Automation (IJCA), having ISSN No. 2005- 4297, Vol. 10, No. 12, December, 2017, page no. 77 to 88.
- Balamurugan Shanmugam, Visalakshi Palaniswami, “Modified Partitioning Algorithm for Privacy Preservation in Microdata Publishing with Full Functional Dependencies”, Australian Journal of Basic and Applied Sciences, 7(8): pp.316-323, July 2013
- Jaganraj L, Balamurugan S. Empirical Investigation on Certain Anonymization Strategies for Preserving Privacy of Social Network Data, International Journal of Emerging Technology and Advanced Engineering. 2013 Oct; 3(10):55–63