Author : Muhsin M P 1
Date of Publication :7th March 2017
Abstract: Composite material market is exponentially growing and finding its application in almost every walks of life. Here we prepared three composites of different stacking sequences and fibre reinforcement for our experiment. We have used areca, jute and glass fibres for making a composite with epoxy as resin. Our composites had ten layers of fibre of different stacking sequence for every specimen. Hand layup technique was used for preparing the material. Compression moulding was done on the stacked laminates and the final product was measured to be 30x30x3 mm. the composite then was converted different specimens as per ASTM standards. The tensile and flexural test was done for every combination of specimen and in three different combinations jute+glassfibre reinforced matrix was found to have more tensile and flexural properties. Graphical results were obtained for the tests and analysed and final result was drafted.
Reference :
-
- Greening transport, European commission. European parliament and thecouncil, SEC/2008/2206 FIN [08.07.08].
- Suddell B, Evans W. Natural fiber composites in automotive applications. In:Mohanty AK, Misra M, Drzal TL, editors. Natural fibers, biopolymers, andbiocomposites. CRC Press; 2005
- Mohanty AK, Misra M, Drzal TL, Selke SE, Harte BR, Hinrichsen G. Naturalfibers, biopolymers, and biocomposites: an introduction. In: Mohanty AK,Misra M, Drzal TL, editors. Natural fibers, biopolymers, and biocomposites. Boca Raton: Crc Press-Taylor & Francis Group; 2005. p. 1–36
- Green composites: A review of adequate materials for automotive applicationsGeorgiosKoroni.⇑, Arlindo Silva, MihailFontulInstituto Superior Tecnico, Mechanical Engineering Department, Lisbon, Portugal;2013
- Tensile, flexural and interlaminar shear properties of wovenjute and jute-glass fabric reinforced polyester compositesK.SabeelAhmeda,∗,S.VijayaranganbaDepartm entof Production Engineering, PSG College of Technology, Coimbatore 641004, India ,Dr. Mahalingam College of Engineering and Technology, Pollachi 642003, India;2008
- Effect of the volume fraction of the jute fibre on Interlaminar Shear Stress and Tensile Behavior Characteristics of Hybrid Glass/Jute Fiber Reinforced Polymer Composite Bar for Concrete Structures Chan-Gi ParkDepartmentofRuralConstructionEngineering,Kongju NationalUniversity,Yesan32439,RepublicofKorea;2016
- Physical and Morphological Properties of Thermoset Composites Reinforced with Jute Preforms Neha Sah1, Alka Goel2, Arun Kumar Chaudhary3 1Ph. D Student, 2Professor, 3Assistant Professor 1, 2,3G.B.Pant University of Agriculture & Technology. Pantnagar, Uttarakhand;2016
- V. Mishra and S. Biswas, “Physical and mechanical properties ofbi-directional jute fiber epoxy composites,Procedia Engineering,vol.51,pp.561– 566,2013.
- D. Ray, B. K. Sarkar, S. Das, and A. K. Rana, “Dynamicmechanical and thermal analysis of vinylesterresin-matrixcomposites reinforced with untreated and alkali-treated jutefibres,”Composites Science and Technology,vol.62,no.7-8,pp.911–917, 2002.
- I. M. De Rosa, C. Santulli, F. Sarasini, and M. Valente, “Postimpact damage characterization of hybrid configurations ofjute/glass polyester laminates using acoustic emission and IRthermography,”Composites Science and Technology,vol.69,no.7-8, pp. 1142–1150, 2009.
- R. Codispoti, D. V. Oliveira, R. S. Olivito, P. B. Lourenc ¸o,and R. Fangueiro, “Mechanical performance of natural fiberreinforced composites for the strengthening of masonry,”Composites Part B: Engineering,vol.77,pp.74–83,2015.
- A. N. Shah and S. C. Lakkad, “Mechanical properties of jutereinforced plastics,”Fibre Science and Technology,vol.15, no.1, pp.41–46,1981.
- J.-P. Won, S.-J.Lee, Y.-J.Kim, C.-I.Jang, and S.-W. Lee,“The effect of exposure to alkaline solution and water on thestrength-porosity relationship of GFRP rebar,”Composites Part B: Engineering,vol.39,no.5,pp.764–772,2008
- Study on Mechanical Properties of Natural - Glass Fibre Reinforced Polymer HybridComposites: A Review Sanjay MR a*, Arpitha GR a & B YogeshaaDepartmentof Mechanical Engineering, Malnad College of Engineering, Hassan-573202, Visvesvaraya Technological University, Belgavi, Karnataka, India;2015
- Study on Mechanical Properties of Natural - Glass Fibre Reinforced Polymer HybridComposites: A Review Sanjay MR a*, Arpitha GR a & B YogeshaaDepartmentof Mechanical Engineering, Malnad College of Engineering, Hassan-573202, Visvesvaraya Technological University, Belgavi, Karnataka, India;2015
- Development of naturalfibrereinforcedflame retarded epoxy resin Composites; Bata Szolnokia, KatalinBocza*,Peter L. Sotia*, BrigittaBodzaya*, EmeseZimonyia*, Andrea Toldy b,balintMorlinb, Krzysztof Bujnowicz c, Maria Wladyka-Przybylakc,GygorgyMarosia, aDepartment of Organic Chemistry and Technology, Budapest University of Technology and Economics, H-1111 Budapest, Budafokiút 8, Hungary, bDepartment of Polymer Engineering, Budapest University of Technology and Economics, H-1111 Budapest, M} uegyetemrkp 3, Hungary, c Institute of Natural Fibres&Medicinal Plants, 60-630 Pozna n, ul. WojskaPolskiego 71B, Poland;2015